The Bash Shell Startup Files

The shell program /bin/bash (hereafter referred to as just "the shell") uses a collection of startup files to help create an environment. Each file has a specific use and may affect login and interactive environments differently. The files in the /etc directory generally provide global settings. If an equivalent file exists in your home directory it may override the global settings.

An interactive login shell is started after a successful login, using /bin/login, by reading the /etc/passwd file. This shell invocation normally reads /etc/profile and its private equivalent ~/.bash_profile (or ~/.profile if called as /bin/sh) upon startup.

An interactive non-login shell is normally started at the command-line using a shell program (e.g., [prompt]$/bin/bash) or by the /bin/su command. An interactive non-login shell is also started with a terminal program such as xterm or konsole from within a graphical environment. This type of shell invocation normally copies the parent environment and then reads the user's ~/.bashrc file for additional startup configuration instructions.

A non-interactive shell is usually present when a shell script is running. It is non-interactive because it is processing a script and not waiting for user input between commands. For these shell invocations, only the environment inherited from the parent shell is used.

The file ~/.bash_logout is not used for an invocation of the shell. It is read and executed when a user exits from an interactive login shell.

Many distributions use /etc/bashrc for system wide initialization of non-login shells. This file is usually called from the user's ~/.bashrc file and is not built directly into bash itself. This convention is followed in this section.

For more information see info bash -- Nodes: Bash Startup Files and Interactive Shells.

[Note]

Note

Most of the instructions below are used to create files located in the /etc directory structure which requires you to execute the commands as the root user. If you elect to create the files in user's home directories instead, you should run the commands as an unprivileged user.

User Notes: https://wiki.linuxfromscratch.org/blfs/wiki/bash-shell-startup-files

/etc/profile

Here is a base /etc/profile. This file starts by setting up some helper functions and some basic parameters. It specifies some bash history parameters and, for security purposes, disables keeping a permanent history file for the root user. It also sets a default user prompt. It then calls small, single purpose scripts in the /etc/profile.d directory to provide most of the initialization.

For more information on the escape sequences you can use for your prompt (i.e., the PS1 environment variable) see info bash -- Node: Printing a Prompt.

cat > /etc/profile << "EOF"
# Begin /etc/profile
# Written for Beyond Linux From Scratch
# by James Robertson <[email protected]>
# modifications by Dagmar d'Surreal <[email protected]>

# System wide environment variables and startup programs.

# System wide aliases and functions should go in /etc/bashrc.  Personal
# environment variables and startup programs should go into
# ~/.bash_profile.  Personal aliases and functions should go into
# ~/.bashrc.

# Functions to help us manage paths.  Second argument is the name of the
# path variable to be modified (default: PATH)
pathremove () {
        local IFS=':'
        local NEWPATH
        local DIR
        local PATHVARIABLE=${2:-PATH}
        for DIR in ${!PATHVARIABLE} ; do
                if [ "$DIR" != "$1" ] ; then
                  NEWPATH=${NEWPATH:+$NEWPATH:}$DIR
                fi
        done
        export $PATHVARIABLE="$NEWPATH"
}

pathprepend () {
        pathremove $1 $2
        local PATHVARIABLE=${2:-PATH}
        export $PATHVARIABLE="$1${!PATHVARIABLE:+:${!PATHVARIABLE}}"
}

pathappend () {
        pathremove $1 $2
        local PATHVARIABLE=${2:-PATH}
        export $PATHVARIABLE="${!PATHVARIABLE:+${!PATHVARIABLE}:}$1"
}

export -f pathremove pathprepend pathappend

# Set the initial path
export PATH=/usr/bin

# Attempt to provide backward compatibility with LFS earlier than 11
if [ ! -L /bin ]; then
        pathappend /bin
fi

if [ $EUID -eq 0 ] ; then
        pathappend /usr/sbin
        if [ ! -L /sbin ]; then
                pathappend /sbin
        fi
        unset HISTFILE
fi

# Setup some environment variables.
export HISTSIZE=1000
export HISTIGNORE="&:[bf]g:exit"

# Set some defaults for graphical systems
export XDG_DATA_DIRS=${XDG_DATA_DIRS:-/usr/share/}
export XDG_CONFIG_DIRS=${XDG_CONFIG_DIRS:-/etc/xdg/}
export XDG_RUNTIME_DIR=${XDG_RUNTIME_DIR:-/tmp/xdg-$USER}

# Setup a red prompt for root and a green one for users.
NORMAL="\[\e[0m\]"
RED="\[\e[1;31m\]"
GREEN="\[\e[1;32m\]"
if [[ $EUID == 0 ]] ; then
  PS1="$RED\u [ $NORMAL\w$RED ]# $NORMAL"
else
  PS1="$GREEN\u [ $NORMAL\w$GREEN ]\$ $NORMAL"
fi

for script in /etc/profile.d/*.sh ; do
        if [ -r $script ] ; then
                . $script
        fi
done

unset script RED GREEN NORMAL

# End /etc/profile
EOF

The /etc/profile.d Directory

Now create the /etc/profile.d directory, where the individual initialization scripts are placed:

install --directory --mode=0755 --owner=root --group=root /etc/profile.d

/etc/profile.d/bash_completion.sh

[Note]

Note

Using the bash completion script below is controversial. Not all users like it. It adds many (usually over 1000) lines to the bash environment and makes it difficult to use the 'set' command to examine simple environment variables. Omitting this script does not interfere with the ability of bash to use the tab key for file name completion.

This script imports bash completion scripts, installed by many other BLFS packages, to allow TAB command line completion.

cat > /etc/profile.d/bash_completion.sh << "EOF"
# Begin /etc/profile.d/bash_completion.sh
# Import bash completion scripts

# If the bash-completion package is installed, use its configuration instead
if [ -f /usr/share/bash-completion/bash_completion ]; then

  # Check for interactive bash and that we haven't already been sourced.
  if [ -n "${BASH_VERSION-}" -a -n "${PS1-}" -a -z "${BASH_COMPLETION_VERSINFO-}" ]; then

    # Check for recent enough version of bash.
    if [ ${BASH_VERSINFO[0]} -gt 4 ] || \
       [ ${BASH_VERSINFO[0]} -eq 4 -a ${BASH_VERSINFO[1]} -ge 1 ]; then
       [ -r "${XDG_CONFIG_HOME:-$HOME/.config}/bash_completion" ] && \
            . "${XDG_CONFIG_HOME:-$HOME/.config}/bash_completion"
       if shopt -q progcomp && [ -r /usr/share/bash-completion/bash_completion ]; then
          # Source completion code.
          . /usr/share/bash-completion/bash_completion
       fi
    fi
  fi

else

  # bash-completions are not installed, use only bash completion directory
  if shopt -q progcomp; then
    for script in /etc/bash_completion.d/* ; do
      if [ -r $script ] ; then
        . $script
      fi
    done
  fi
fi

# End /etc/profile.d/bash_completion.sh
EOF

Make sure that the directory exists:

install --directory --mode=0755 --owner=root --group=root /etc/bash_completion.d

For a more complete installation, see https://wiki.linuxfromscratch.org/blfs/wiki/bash-shell-startup-files#bash-completions.

/etc/profile.d/dircolors.sh

This script uses the ~/.dircolors and /etc/dircolors files to control the colors of file names in a directory listing. They control colorized output of things like ls --color. The explanation of how to initialize these files is at the end of this section.

cat > /etc/profile.d/dircolors.sh << "EOF"
# Setup for /bin/ls and /bin/grep to support color, the alias is in /etc/bashrc.
if [ -f "/etc/dircolors" ] ; then
        eval $(dircolors -b /etc/dircolors)
fi

if [ -f "$HOME/.dircolors" ] ; then
        eval $(dircolors -b $HOME/.dircolors)
fi

alias ls='ls --color=auto'
alias grep='grep --color=auto'
EOF

/etc/profile.d/extrapaths.sh

This script adds some useful paths to the PATH and can be used to customize other PATH related environment variables (e.g. LD_LIBRARY_PATH, etc) that may be needed for all users.

cat > /etc/profile.d/extrapaths.sh << "EOF"
if [ -d /usr/local/lib/pkgconfig ] ; then
        pathappend /usr/local/lib/pkgconfig PKG_CONFIG_PATH
fi
if [ -d /usr/local/bin ]; then
        pathprepend /usr/local/bin
fi
if [ -d /usr/local/sbin -a $EUID -eq 0 ]; then
        pathprepend /usr/local/sbin
fi

if [ -d /usr/local/share ]; then
        pathprepend /usr/local/share XDG_DATA_DIRS
fi

# Set some defaults before other applications add to these paths.
pathappend /usr/share/man  MANPATH
pathappend /usr/share/info INFOPATH
EOF

/etc/profile.d/readline.sh

This script sets up the default inputrc configuration file. If the user does not have individual settings, it uses the global file.

cat > /etc/profile.d/readline.sh << "EOF"
# Setup the INPUTRC environment variable.
if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ] ; then
        INPUTRC=/etc/inputrc
fi
export INPUTRC
EOF

/etc/profile.d/umask.sh

Setting the umask value is important for security. Here the default group write permissions are turned off for system users and when the user name and group name are not the same.

cat > /etc/profile.d/umask.sh << "EOF"
# By default, the umask should be set.
if [ "$(id -gn)" = "$(id -un)" -a $EUID -gt 99 ] ; then
  umask 002
else
  umask 022
fi
EOF

/etc/profile.d/i18n.sh

This script sets an environment variable necessary for native language support. A full discussion on determining this variable can be found on the LFS Bash Shell Startup Files page.

cat > /etc/profile.d/i18n.sh << "EOF"
# Set up i18n variables
export LANG=<ll>_<CC>.<charmap><@modifiers>
EOF

Other Initialization Values

Other initialization can easily be added to the profile by adding additional scripts to the /etc/profile.d directory.

/etc/bashrc

Here is a base /etc/bashrc. Comments in the file should explain everything you need.

cat > /etc/bashrc << "EOF"
# Begin /etc/bashrc
# Written for Beyond Linux From Scratch
# by James Robertson <[email protected]>
# updated by Bruce Dubbs <[email protected]>

# System wide aliases and functions.

# System wide environment variables and startup programs should go into
# /etc/profile.  Personal environment variables and startup programs
# should go into ~/.bash_profile.  Personal aliases and functions should
# go into ~/.bashrc

# Provides colored /bin/ls and /bin/grep commands.  Used in conjunction
# with code in /etc/profile.

alias ls='ls --color=auto'
alias grep='grep --color=auto'

# Provides prompt for non-login shells, specifically shells started
# in the X environment. [Review the LFS archive thread titled
# PS1 Environment Variable for a great case study behind this script
# addendum.]

NORMAL="\[\e[0m\]"
RED="\[\e[1;31m\]"
GREEN="\[\e[1;32m\]"
if [[ $EUID == 0 ]] ; then
  PS1="$RED\u [ $NORMAL\w$RED ]# $NORMAL"
else
  PS1="$GREEN\u [ $NORMAL\w$GREEN ]\$ $NORMAL"
fi

unset RED GREEN NORMAL

# End /etc/bashrc
EOF

~/.bash_profile

Here is a base ~/.bash_profile. If you want each new user to have this file automatically, just change the output of the command to /etc/skel/.bash_profile and check the permissions after the command is run. You can then copy /etc/skel/.bash_profile to the home directories of already existing users, including root, and set the owner and group appropriately.

cat > ~/.bash_profile << "EOF"
# Begin ~/.bash_profile
# Written for Beyond Linux From Scratch
# by James Robertson <[email protected]>
# updated by Bruce Dubbs <[email protected]>

# Personal environment variables and startup programs.

# Personal aliases and functions should go in ~/.bashrc.  System wide
# environment variables and startup programs are in /etc/profile.
# System wide aliases and functions are in /etc/bashrc.

if [ -f "$HOME/.bashrc" ] ; then
  source $HOME/.bashrc
fi

if [ -d "$HOME/bin" ] ; then
  pathprepend $HOME/bin
fi

# Having . in the PATH is dangerous
#if [ $EUID -gt 99 ]; then
#  pathappend .
#fi

# End ~/.bash_profile
EOF

~/.profile

Here is a base ~/.profile. The comments and instructions for using /etc/skel for .bash_profile above also apply here. Only the target file names are different.

cat > ~/.profile << "EOF"
# Begin ~/.profile
# Personal environment variables and startup programs.

if [ -d "$HOME/bin" ] ; then
  pathprepend $HOME/bin
fi

# Set up user specific i18n variables
#export LANG=<ll>_<CC>.<charmap><@modifiers>

# End ~/.profile
EOF

~/.bashrc

Here is a base ~/.bashrc.

cat > ~/.bashrc << "EOF"
# Begin ~/.bashrc
# Written for Beyond Linux From Scratch
# by James Robertson <[email protected]>

# Personal aliases and functions.

# Personal environment variables and startup programs should go in
# ~/.bash_profile.  System wide environment variables and startup
# programs are in /etc/profile.  System wide aliases and functions are
# in /etc/bashrc.

if [ -f "/etc/bashrc" ] ; then
  source /etc/bashrc
fi

# Set up user specific i18n variables
#export LANG=<ll>_<CC>.<charmap><@modifiers>

# End ~/.bashrc
EOF

~/.bash_logout

This is an empty ~/.bash_logout that can be used as a template. You will notice that the base ~/.bash_logout does not include a clear command. This is because the clear is handled in the /etc/issue file.

cat > ~/.bash_logout << "EOF"
# Begin ~/.bash_logout
# Written for Beyond Linux From Scratch
# by James Robertson <[email protected]>

# Personal items to perform on logout.

# End ~/.bash_logout
EOF

/etc/dircolors

If you want to use the dircolors capability, then run the following command. The /etc/skel setup steps shown above also can be used here to provide a ~/.dircolors file when a new user is set up. As before, just change the output file name on the following command and assure the permissions, owner, and group are correct on the files created and/or copied.

dircolors -p > /etc/dircolors

If you wish to customize the colors used for different file types, you can edit the /etc/dircolors file. The instructions for setting the colors are embedded in the file.

Finally, Ian Macdonald has written an excellent collection of tips and tricks to enhance your shell environment. You can read it online at http://www.caliban.org/bash/index.shtml.